Modular Motor Control Center Enclosures

• PHASE #1: Basic Structure - Overall Outside Dimension
• PHASE #2: Load Bearing Roof Deck
• PHASE #3: Floor Framing, Finished Floor, Doors, Frames & Acoustics
• PHASE #4: Painting
• PHASE #5: Electrical Package

#1 BASIC STRUCTURE – SINGLE MODULE POWER CONTROL ROOM

• The enclosure to be constructed in unitized form and shall be fully welded, utilizing tubular steel products.
• Unit will have crane lifting lugs fully welded at reinforced vertical members.
• The door openings to have a vertical subframe of 4" tubular steel to prevent deflection, displacement, and twisting of the steel doors and frames.
• Wall system to be utilized within the 4" tubular steel panel superstructure to be CID wall panel.
• Exterior wall panels to be carbon steel plate with continuous weld seams and VOC compliant alkyd industrial enamel finish.
• The 4" wall system to incorporate mineral fiber acoustical insulating blanket.
• This insulation will serve as a thermal barrier, dust barrier, and sound deadener.
• The interior porcelain enamel finish steel hard wall panels are extremely rugged, nonchalking, corrosion resistant, and maintenance free.

#2 LOAD BEARING ROOF

• The unitized tubular steel framework is designed for and will accommodate recessed structural steel channels inside the lifting crown framework.
• A 10 gauge carbon steel load bearing roof shall be placed and fully seam welded (continuous) at panel junctures and at the structure periphery.
• The completed roof material system shall be fully load bearing to meet owner specification.
• The completed roof system is weather and water tight.

#3 FLOOR FRAMING, FINISHED FLOOR, DOORS, FRAMES, & ACOUSTICS

• Floor framing materials to consist of tubular steel perimeter base members and structural steel C-channels, located to support exterior undercover as well as the finished floor system.
• Steel C-channels are to be welded to the unit superstructure tubular steel base.
• Finished subfloor of the structure to be steel plate.
• Area between the interior and exterior floors to have mineral fiber insulating material, securely fastened to the understructure of the finished floor system.
• The fire resistant, mildew proof insulation is inert and will provide both sound and thermal protections.
• Exterior doors to be supplied with the enclosure at the entry locations.

#4 PAINTING

• All surfaces receiving coating shall be properly prepared as per paint manufacturer's specifications prior to the application of the first prime coat.
• Paint color selection and accents to be as selected by the owner. Corporate colors and company logos may be provided at no additional charge.

#5 ELECTRICAL PACKAGE

• The CID state of the art liftable building shall be furnished with an integral electrical wiring system, including one 12 circuit, 125 amp rated distribution panel.
• The load center to accommodate duplex wall receptacles with GFI protection where required.
• Surface mount 2' x 4' fluorescent light fixtures will be provided.
• All wiring is to be installed as per NEC code and to be installed with recessed EMT metal conduit.
• Independent electrical inspection certificate may be provided if requested.
• Ceiling mounted dual head emergency light unit is included with lighted exit sign at the door(s).

ADDITIONAL OPTIONS INCLUDE:

• Walkways, stairs, platforms with support structures for elevated installation, and HVAC equipment.

To access a complete specification package please contact CID Buildings and ask to speak with someone in sales.